RIP
Configuring RIP Through the WEB GUI
Cisco 500 Series Stackable Managed Switch Administration Guide
432
23
-
MD5
—The MD5 digest of the key chain selected below is used for
authentication.
•
Key Password—If Text was selected as the authentication type, enter the
password to be used.
•
Key Chain—If MD5 was selected as the authentication type, enter the key
chain to be digested. This key chain is created as described in the
Key
Management
section.
•
Default Route
—Specifies whether RIP generates a default route on the
specified IP interface. If this is enabled, the Metric field is enabled.
•
Default Route Metric—Specifies the metric for the default route.
•
Distribute-list In
—Specifies whether filtering is enabled/disabled for RIP
incoming routes for the specified IP address(es) list. If this field is enabled,
select the Access List Name below.
•
Access List Name—Specifies the Access List name (which includes a list of
IP addresses)) of RIP incoming routes filtering for a specified IP interface.
See
Creating an Access List
for a description of access lists.
•
Distribute-list Out
—Specifies whether filtering is enabled/disabled for RIP
outgoing routes for the specified IP address(es) list. If this field is enabled,
select the Access List Name below.
•
Access List Name—Specifies the Access List name (which includes a list of
IP addresses)) of RIP outgoing routes filtering for a specified IP interface. See
Creating an Access List
for a description of access lists.
STEP 3
Click Apply. The settings are written to the Running Configuration file.
Displaying RIP Statistic Counters
To view the RIP statistical counters for each IP address:
STEP 1
Click
IP Configuration
>
RIPv2 > RIPv2 Statistics
. The
RIPv2 Statistics page is
displayed
.
The following fields are displayed:
•
IP Interface
—IP interface defined on the Layer 2 interface.
