Viewing Statistics
Managing RMON
Cisco 500 Series Stackable Managed Switch Administration Guide
20
2
•
Collisions
—Number of collisions received. If Jumbo Frames are enabled,
the threshold of Jabber Frames is raised to the maximum size of Jumbo
Frames.
•
Frames of 64 Bytes
—Number of frames, containing 64 bytes that were
received.
•
Frames of 65 to 127 Bytes
—Number of frames, containing 65-127 bytes
that were received.
•
Frames of 128 to 255 Bytes
—Number of frames, containing 128-255 bytes
that were received.
•
Frames of 256 to 511 Bytes
—Number of frames, containing 256-511 bytes
that were received.
•
Frames of 512 to 1023 Bytes
—Number of frames, containing 512-1023
bytes that were received.
•
Frames greater than 1024 Bytes
—Number of frames, containing 1024-
2000 bytes, and Jumbo Frames, that were received.
To clear statistics counters:
•
Click
Clear Interface Counters
to clear the selected interface’s counters.
•
Click
Clear All Interface Counters
to clear the counters of all interfaces.
Configuring RMON History
The RMON feature enables monitoring statistics per interface.
The
History Control Table
page
defines the sampling frequency, amount of
samples to store and the port from where to gather the data.
After the data is sampled and stored, it is displayed in the
History Table
page that
can be viewed by clicking
History Table
.
To enter RMON control information:
STEP 1
Click
Status and Statistics
>
RMON
>
History
. The
History Control Table
page is
displayed. The fields displayed on this page are defined in the
Add RMON History
