Getting Started
Quick Start Switch Configuration
Cisco 500 Series Stackable Managed Switch Administration Guide
4
1
A flashing red X icon displayed to the left of the
Save
application link indicates that
Running Configuration changes have been made that have not yet been saved to
the Startup Configuration file. The flashing can be disabled by clicking on the
Disable Save Icon Blinking button on the Copy/Save Configuration page
When the switch auto-discovers a device, such as an IP phone, it configures the
port appropriately for the device. These configuration commands are written to the
Running Configuration file. This causes the Save icon to begin blinking when the
user logs on even though the user did not make any configuration changes.
When you click
Save
, the
Copy/Save Configuration
page is displayed. Save the
Running Configuration file by copying it to the Startup Configuration file. After this
save, the red X icon and the Save application link are no longer displayed.
To logout, click
Logout
in the top right corner of any page. The system logs out of
the switch.
When a timeout occurs or you intentionally log out of the system, a message is
displayed and the
Login
page opens, with a message indicating the logged-out
state. After you log in, the application returns to the initial page.
The initial page displayed depends on the “Do not show this page on startup”
option in the
Getting Started
page
.
If you did not select this option, the initial page
is the
Getting Started
page
.
If you did select this option, the initial page is the
System Summary
page.
Quick Start Switch Configuration
To simplify switch configuration through quick navigation, the
Getting Started
page
provides links to the most commonly used pages.
Links on the Getting Started page
Category
Link Name (on the Page)
Linked Page
Initial Setup
Change System Mode
System Mode and Stack
Management
page
Change Management
Applications and Services
TCP/UDP Services
page
Change Device IP Address
IPv4 Interface
page
