Cisco D9854, Руководство по установке и настройке, Страница: 342 / 440

Chapter 6 Service and Maintenance
318
Alarm Message
Type Message Cause/Remedy Description Severity ID
Digital
Program
Mapping
Set Program Collision Cause: Uplink
settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink
to find the
appropriate
system settings.
Two source
channel
numbers are
being mapped/
passed to the
same channel
number in the
output.
Minor 19000
Digital
Program
Mapping
Set Mode-i PMT out
of range Cause: Uplink
settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink
to find the
appropriate
system settings.
PMT PID to be
used for Mode-
i is outside of
valid MPEG
PID range.
Major 19000
Digital
Program
Mapping
Clear Digital Program
Mapping - OK – – Major 19000
Shutdown
Event Set DL APP REBOOT Cause: User
request requires
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify Cisco
Services if the
problem persists.
New
application
downloaded,
system requires
reboot.
Major 20000