Cisco D9854 Скачать руководство пользователя страница 195

Страница: 195 / 440

Setting up Input Information

171

Parameter

Description

ASI Transport

Indicates the current transport synchronization status (Error,
Ok, or N/A).

ASI Packet Size (bytes)

Indicates the packet size (in bytes) for the ASI input (188, 204,
or N/A).

Acquisition State

Displays Full if the ASI and PSI tables have all been found.

Otherwise, it will display Degraded if there are missing tables
or None if no ASI or PSI tables have been found.

TS ID

The Transport ID (in the range from 1 to 65535).

Configuring the IP Input

Note:

This feature is for D9854-I only.

From the user interface of the D9854-I, choose

Input

Input Setup

. The Input

Setup page is displayed.

Click the

tab.

Содержание D9854

























































































































































































































































































































































































































































Результаты поиска

Содержание D9854

Отзывы:

Cisco D9854, Руководство по установке и настройке, Страница: 195 / 440

Результаты поиска

Содержание D9854

Отзывы: