Cisco D9854, Руководство по установке и настройке, Страница: 246 / 440

Chapter 5 Web GUI Setup and Monitoring
222
f The Avg Data column displays the number of words per frame the service
occupies.
g The Pkt OK column displays the number of transmitted data packets per
frame for the service.
h The Pkt Drop column displays the number of dropped data packets for the
service.
4 In the SDI Audio Group Setup area, you can choose the audio channel group
and audio channels from the available audio group. The following describes the
parameters:
SDI Audio Group Setup Description
Audio Group Displays the channel group (1 to 4).
Group Slot Displays the HANC position (1 to 4).
Audio Decode Choose the audio source (1 or 2).
Channel Choose the source audio channel (Left or Right).
5 The status table displays the current SDI information. The following describes
the parameters:
SDI Status Description
Interlaced Displays whether the video is interlaced.
Lines Displays the video resolution (number of lines per
frame).
First/Last/Switch
Displays the range of inactive video lines ( First to Last )
for the current video format. The VANC data is inserted
in the video line(s), following the Switch line. The
numbers are for the top field if it is an interlaced video,
or for the frame if it is a progressive video.
Note: The SMPTE standard recommends using lines
starting from Switch line + 2.
Frames/Second Displays the number of frames per second.
Words Displays the number of VANC words per line.
Multiline Displays whether Multiline VANC insertion is
supported. For D9854 with SDI units, this is only
supported in the current FPGA implementation
(R00.00.05). If a previous FPGA version is installed,
Multiline is not supported until you upgrade the FPGA.
6 Click Apply .