Cisco D9854, Руководство по установке и настройке, Страница: 253 / 440

Configuring Transport Stream Information
229
i In the First Channel First ES PID Number field, set the first ES PID
number. The default is 101.
ii In the First ES PID Numbers Offset field, set the offset of the first ES PID
of subsequent channel numbers. For example, if the First ES PID Number
is set to 101 and the ES PID Numbers Offset is set to 100, then the first ES
PID number is 101, and the second ES PID number is 201.
d From the Use Input PMT ES Stream Order drop-down list, choose Yes to
assign the ES PID according to the incoming PMT order. Otherwise, set to No
to use the reserved PIDs defined below.
i In the PCR , VID , AUD , SUBT , VBI , DPI , MPE , TTX , DATA , LSD , CDT ,
ETV fields, set the number of PIDs for the specified streams (PCR, VID,
AUD, SUBT, VBI, DPI, MPE, TTX, DATA, LSD, CDT, ETV) in one
channel.
e Click OK .
4 Click Apply .
Viewing the ASI Output Status
The ASI Output Status area displays the current Output Rate (0 to 213 Mbps) and
the available bit bandwidth ( Free Bandwidth ), in Mbps.