22-7
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 22 Configuring Cisco IOS Auto Smartport Macros
Configuring Auto Smartport Macros
The
no macro auto execute
event trigger
{[
builtin
built-in macro name
[
parameter=value
]] |
[[
parameter
=
value
]
{
function contents
}
]} command deletes the mapping.
This example shows how to use two built-in Auto Smartport macros for connecting Cisco switches and
Cisco IP phones to the switch. This example modifies the default voice VLAN, access VLAN, and native
VLAN for the trunk interface:
Switch#
configure terminal
Switch(config)#
macro auto execute CISCO_PHONE_EVENT builtin CISCO_PHONE_AUTO_SMARTPORT
ACCESS_VLAN=10 VOICE_VLAN=20
Switch(config)#
Switch(config)#
Step 2
Switch(config)#
macro auto execute
event trigger
builtin
built-in
macro name
[
parameter=value
]
[
parameter=value
]
Defines mapping from an event trigger to a built-in macro.
Specify an
event
trigger
value:
•
CISCO_PHONE_EVENT
•
CISCO_SWITCH_EVENT
•
CISCO_ROUTER_EVENT
•
CISCO_WIRELESS_AP_EVENT
•
CISCO_WIRELESS_LIGHTWEIGHT_AP_EVENT
•
CISCO_DMP_EVENT
•
CISCO_IPVSC_EVENT
•
WORD—Apply a user-defined event trigger.
Specify a
built-in macro name
value:
•
CISCO_PHONE_AUTO_SMARTPORT
(Optional) Specify the parameter values: $ACCESS_VLAN=(1) and
$VOICE_VLAN=(2).
•
CISCO_SWITCH_AUTO_SMARTPORT
(Optional) Specify the parameter values: $NATIVE_VLAN=(1).
•
CISCO_ROUTER_AUTO_SMARTPORT
(Optional) Specify the parameter values: $NATIVE_VLAN=(1).
•
CISCO_AP_AUTO_SMARTPORT
(Optional) Specify the parameter values: $NATIVE_VLAN=(1).
•
CISCO_LWAP_AUTO_SMARTPORT
(Optional) Specify the parameter values: $ACCESS_VLAN=(1).
•
CISCO_DMP_AUTO_SMARTPORT
•
CISCO_IP_CAMERA_AUTO_SMARTPORT
(Optional)
parameter=value
—Replace default values that begin with $.
Enter new values in the form of name value pair separated by a space:
[
name1
=
value1
name2
=
value2
...]. Default values are shown in
parenthesis.
Step 3
Switch(config)#
end
Returns to privileged EXEC mode.
Step 4
Switch#
show running-config
Verifies your entries.
Step 5
Switch#
copy running-config
startup-config
(Optional) Saves your entries in the configuration file.
Command
Purpose
Содержание Catalyst 4500 Series
Страница 2: ......
Страница 4: ......
Страница 2086: ...Index IN 46 Software Configuration Guide Release IOS XE 3 9 0E and IOS 15 2 5 E ...