Cisco Catalyst 4500 Series, Руководство по настройке программного обеспечения

Страница: 1189 / 2086

44-93
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 44 Configuring Quality of Service
Configuring Auto-QoS on a Standalone Supervisor Engine 6-E/6L-E or Supervisor Engine 7-E/7L-E/8-E
set cos 2
set qos-group 18
Class AutoQos-4.0-Bulk-Data-Classify
set dscp af11
set cos 1
set qos-group 10
Class AutoQos-4.0-Scavenger-Classify
set dscp cs1
set cos 1
set qos-group 8
Class AutoQos-4.0-Default-Classify
set dscp default
set cos 0
The class maps used for Output matching are as follows:
! Since we assigned matched traffic to a qos-group on input,
! we only need to match the qos-group on output
! Note: Any other traffic not matched on input and assigned to a qos-group goes into the
class-default queue
! for control traffic (CS3 and AF31)
class-map match-all AutoQos-VoIP-Control-QosGroup24
match qos-group 24
class-map match-all AutoQos-VoIP-Control-QosGroup26
match qos-group 26
! For phone to phone (Bearer EF) traffic
class-map match-all AutoQos-VoIP-Bearer-QosGroup
match qos-group 46
! For softphone
Class Map match-any AutoQos-4.0-Scavenger-Queue (id 24)
Match qos-group 8
Match dscp cs1 (8)
Class Map match-all AutoQos-4.0-Priority-Queue (id 3)
Match qos-group 32
Class Map match-all AutoQos-4.0-Control-Mgmt-Queue (id 28)
Match qos-group 16
Class Map match-all AutoQos-4.0-Multimedia-Conf-Queue (id 10)
Match qos-group 34
Class Map match-all AutoQos-4.0-Multimedia-Stream-Queue (id 5)
Match qos-group 26
Class Map match-all AutoQos-4.0-Trans-Data-Queue (id 30)
Match qos-group 18
Class Map match-all AutoQos-4.0-Bulk-Data-Queue (id 17)
Match qos-group 10