Cisco Catalyst 4500 Series, Руководство по настройке программного обеспечения

Страница: 1671 / 2086

62-47
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 62 Configuring Network Security with ACLs
Configuring Object Group ACLs
Creating an IPv6 Service Object Group
To create an IPv6 service object group , perform this task:
Step 4
Repeat the steps until you have specified all objects on
which you want to base your object group.
Example:
Switch(config-v6network-group)# 2002::1/64
—
Step 5 { end } | { exit }
Example:
Switch(config-network-group)# end
To exit the configuration mode, enter the end command.
To exit the IPv6-address object-group configuration mode,
enter the
exit command.
Command or Action Purpose
Command or Action Purpose
Step 1 configure terminal
Example:
Switch# configure terminal
Enters global configuration mode.
Step 2 object-group v6-service object-group-name
Example:
Switch(config)# object-group v6-service mySG
Defines object group name and enters the service
object-group configuration mode.
Step 3 { 0-255 | ahp | description descripton-text | esp | exit |
group-object | hbh | icmp | ipv6 | no | pcp | s ctp | tcp
| tcp-udp | udp }
Example:
Switch(config-v6service-group)# description
example of service object group
Switch(config-v6service-group)# esp
(Optional) Configures a member of the group and specifies
a description of the object group.
For the object group, you can configure a network address
plus mask or a host (identified by host name or IPv6
address)
Step 4 Repeat the steps until you have specified all objects on
which you want to base your object group.
Example:
Switch(config-v6service-group)# ahp
—
Step 5 { end } | { exit }
Example:
Switch(config-v6service-group)# end
To exit the configuration mode, enter the end command.
To exit the IPv6-address object-group configuration mode,
enter the
exit command.