Cisco Catalyst 4500 Series, Руководство по настройке программного обеспечения, Страница: 1862 / 2086

75-12
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 75 Configuring Ethernet OAM and CFM
Configuring Ethernet CFM
Use the no form of each command to remove a configuration or to return to the default settings.
The following example illustrates how to configure Ethernet CFM crosscheck:
Switch(config)# ethernet cfm mep crosscheck start-delay 60
Switch(config)# ethernet cfm domain abc level 3
Switch(config-ecfm)# service test vlan 5
Switch(config-ecfm-srv)# mep mpid 23
Switch(config-ecfm-srv)# mep mpid 34
Switch(config-ecfm-srv)# end
Switch# ethernet cfm mep crosscheck enable domain abc vlan 5
Switch# show ethernet cfm maintenance-points remote crosscheck
-------------------------------------------------------------------------
MPID Domain Name Lvl Type Id Mep-Up
MA Name
-------------------------------------------------------------------------
23 abc 3 Vlan 5 No
test
34 abc 3 Vlan 5 No
test
Switch# show ethernet cfm errors
--------------------------------------------------------------------------------
MPID Domain Id Mac Address Type Id
MA Name Reason Lvl Age
--------------------------------------------------------------------------------
34 abc 0000.0000.0000 Vlan 5
test RMEP missing 3 95s
23 abc 0000.0000.0000 Vlan 5
test RMEP missing 3 95s
Switch#
Step 7
Switch# ethernet cfm mep crosscheck
{
enable
|
disable
}
domain domain-name { vlan
{
vlan-id
|
any} | port }
•
Enable or disable CFM crosscheck for one or more
VLANs or a port MEP in the domain.
•
domain domain-name —Specify the name of the
created domain.
• vlan { vlan-id | any }—Enter the service provider
VLAN ID or IDs as a VLAN-ID (1 to 4094), a range of
VLAN-IDs separated by a hyphen, or a series of
VLAN IDs separated by comma. Enter any for any
VLAN.
•
port —Identify a port MEP
Step 8
Switch# show ethernet cfm maintenance-points
remote crosscheck
Verifies the configuration.
Step 9
Switch# show ethernet cfm errors
[ configuration ]
Enter this command after you enable CFM crosscheck to
display the results of the crosscheck operation. Enter the
configuration keyword to display the configuration error
list.
Step 10
Switch#
copy running-config startup-config
(Optional) Saves your entries in the configuration file.
Command Purpose