Cisco Catalyst 4500 Series, Руководство по настройке программного обеспечения

Страница: 164 / 2086

3-20
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 3 Configuring the Switch for the First Time
Controlling Access to Privileged EXEC Commands
To disable AAA, use the no aaa new-model global configuration command. To disable AAA
authentication, use the no aaa authentication login { default | list-name } method1 [ method2... ] global
configuration command. To either disable authentication for logins or to return to the default
value, use the
no login authentication { default | list-name } line configuration command.
Step 3
aaa authentication login
{
default
|
list-name
}
method1
[
method2...
]
Creates a login authentication method list.
•
To create a default list that is used when a named list is not specified
in the login authentication command, use the default keyword
followed by the methods that you plan to use in default situations. The
default method list is automatically applied to all ports.
• For list-name , specify a character string to name the list you are
creating.
•
For method1... , specify the actual method the authentication
algorithm tries. The additional methods of authentication are used
only if the previous method returns an error, not if it fails.
Select one of these methods:
•
enable —Use the enable password for authentication. Before you can
use this authentication method, you must define an enable password
by using the
enable password global configuration command.
•
group —Uses authentication. Before you can use
this authentication method, you must configure the server.
For more information, see the
“Identifying the Server Host
and Setting the Authentication Key” section on page 3-18 .
•
line —Use the line password for authentication. Before you can use
this authentication method, you must define a line password. Use the
password password line configuration command.
• local —Use the local username database for authentication. You must
enter username information in the database. Use the username
password global configuration command.
•
local-case —Use a case-sensitive local username database for
authentication. You must enter username information in the database
by using the
username name password global configuration
command.
• none —Do not use any authentication for login.
Step 4
line
[
console
|
tty
|
vty
]
line-number
[ ending-line-number
]
Enters line configuration mode, and configures the lines to which you
want to apply the authentication list.
Step 5
login authentication
{
default
|
list-name
}
Applies the authentication list to a line or set of lines.
•
If you specify default , use the default list created with the aaa
authentication login command.
•
For list-name , specify the list created with the aaa authentication
login command.
Step 6
end
Returns to privileged EXEC mode.
Step 7
show running-config
Verifies your entries.
Step 8
copy running-config startup-config
(Optional) Saves your entries in the configuration file.
Command Purpose