5-51
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 5 Configuring Virtual Switching Systems
Configuring a VSS
Port security = Disabled
Ports in the Port-channel:
Index Load Port EC state No of bits
------+------+------+------------------+-----------
0 00 Gi1/3/26 Desirable-Sl 0
1 00 Gi2/2/26 Desirable-Sl 0
Time since last port bundled: 0d:00h:05m:25s Gi2/2/26
Switch#
This example shows how to display a one-line summary per channel group:
Switch#
show etherchannel summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
M - not in use, minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 3
Number of aggregators: 3
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
1 Po1(RU) PAgP Gi1/3/26(P) Gi2/2/26(P)
10 Po10(SU) - Te1/1/1(P) Te1/1/4(D)
20 Po20(SU) - Te2/1/1(P)
Prior to Cisco Release IOS XE 3.5.0E and IOS 15.2(1)SG, when you tried to add a port to an
EtherChannel from different chassis of the VSS system, an error message displayed:
Switch(config)#
int gi2/3/26
Switch(config-if)#
no switchport
Switch(config-if)#
channel-group 50 mode on
Switch(config-if)#
Switch(config)#
int gi1/1/48
Switch(config-if)#
no switchport
Switch(config-if)#
channel-group 50 mode on
Layer 3 MEC is not supported: GigabitEthernet1/1/48 on switch 1 cannot be part of
port-channel 50 with members on switch 2.
Command rejected: conflicts with Unsupported Layer 3 MEC
Switch(config-if)#
Содержание Catalyst 4500 Series
Страница 2: ......
Страница 4: ......
Страница 2086: ...Index IN 46 Software Configuration Guide Release IOS XE 3 9 0E and IOS 15 2 5 E ...