Cisco ASA 5512-X Скачать руководство пользователя

Страница: 219 / 422

8-27

Cisco ASA Series Firewall CLI Configuration Guide

Chapter 8 Inspection for Voice and Video Protocols

SIP Inspection

•

match

[

not

]

im-subscriber regex

{

regex_name

class

class_name

}—Matches the SIP IM

subscriber against the specified regular expression or regular expression class.

•

match

[

not

]

message-path regex

{

regex_name

class

class_name

}—Matches the SIP via

header against the specified regular expression or regular expression class.

•

match

[

not

]

request-method

method

—Matches a SIP request method: ack, bye, cancel, info,

invite, message, notify, options, prack, refer, register, subscribe, unknown, update.

•

match

[

not

]

third-party-registration regex

{

regex_name

class

class_name

}—Matches the

requester of a third-party registration against the specified regular expression or regular
expression class.

•

match

[

not

]

uri {sip | tel} length gt

bytes

—Matches a URI in the SIP headers of the selected

type (SIP or TEL) that is greater than the length specified, between 0 and 65536 bytes.

Enter

exit

to leave class map configuration mode.

Step 2

Create a SIP inspection policy map, enter the following command:

hostname(config)#

policy-map type inspect sip

policy_map_name

hostname(config-pmap)#

Where the

policy_map_name

is the name of the policy map. The CLI enters policy-map configuration

mode.

Step 3

(Optional) To add a description to the policy map, enter the following command:

hostname(config-pmap)#

description

string

Step 4

To apply actions to matching traffic, perform the following steps.

Specify the traffic on which you want to perform actions using one of the following methods:

•

If you created a SIP class map, specify it by entering the following command:

hostname(config-pmap)#

class

class_map_name

hostname(config-pmap-c)#

•

Specify traffic directly in the policy map using one of the

match

commands described for SIP

class maps. If you use a

match not

command, then any traffic that does not match the criterion

in the

match not

command has the action applied.

Specify the action you want to perform on the matching traffic by entering the following command:

hostname(config-pmap-c)# {[

drop

drop-connection

reset

] [

log

] |

rate-limit

message_rate

}

Not all options are available for each

match

class

command. See the CLI help or the command

reference for the exact options available.

The

drop

keyword drops all packets that match.

The

drop-connection

keyword drops the packet and closes the connection.

The

reset

keyword drops the packet, closes the connection, and sends a TCP reset to the server

and/or client.

The

log

keyword, which you can use alone or with one of the other keywords, sends a system log

message.

The

rate-limit

message_rate

argument limits the rate of messages. Rate limiting is available for

request method matches to “invite” and “register” only.

You can specify multiple

class

match

commands in the policy map. For information about the order

class

and

match

commands, see

Defining Actions in an Inspection Policy Map, page 2-4

Содержание ASA 5512-X







































































































































































































































































































































































































































Результаты поиска

Содержание ASA 5512-X

Отзывы:

Похожие инструкции для ASA 5512-X

Бренды по названию

Популярные бренды

Cisco ASA 5512-X, Руководство по настройке

Результаты поиска

Содержание ASA 5512-X

Отзывы:

Похожие инструкции для ASA 5512-X

Бренды по названию

Популярные бренды