manualshive.com logo in svg

Cisco ASA 5512-X, Руководство по настройке

"Загрузите бесплатный руководство по установке оборудования Cisco ASA 5512-X на нашем сайте. Подробное руководство по установке оборудования поможет вам развернуть устройство правильно и эффективно. Посетите manualshive.com сейчас, чтобы загрузить manual."

Поделиться
Скачать
background image

 

8-2

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 8      Inspection for Voice and Video Protocols

  CTIQBE Inspection

•

Entering the 

debug ctiqbe

 command might delay message transmission, which can have a 

performance impact in a real-time environment. When you enable this debugging or logging and 
Cisco IP SoftPhone seems unable to complete call setup through the ASA, increase the timeout 
values in the Cisco TSP settings on the system running Cisco IP SoftPhone.

The following summarizes special considerations when using CTIQBE application inspection in specific 
scenarios:

•

If two Cisco IP SoftPhones are registered with different Cisco CallManagers, which are connected 
to different interfaces of the ASA, calls between these two phones fail.

•

When Cisco CallManager is located on the higher security interface compared to 
Cisco IP SoftPhones, if NAT or outside NAT is required for the Cisco CallManager IP address, the 
mapping must be static as Cisco IP SoftPhone requires the Cisco CallManager IP address to be 
specified explicitly in its Cisco TSP configuration on the PC.

•

When using PAT or Outside PAT, if the Cisco CallManager IP address is to be translated, its TCP 
port 2748 must be statically mapped to the same port of the PAT (interface) address for Cisco IP 
SoftPhone registrations to succeed. The CTIQBE listening port (TCP 2748) is fixed and is not 
user-configurable on Cisco CallManager, Cisco IP SoftPhone, or Cisco TSP.

Verifying and Monitoring CTIQBE Inspection

The 

show ctiqbe 

command displays information regarding the CTIQBE sessions established across the 

ASA. It shows information about the media connections allocated by the CTIQBE inspection engine.

The following is sample output from the 

show ctiqbe 

command under the following conditions. There 

is only one active CTIQBE session setup across the ASA. It is established between an internal CTI 
device (for example, a Cisco IP SoftPhone) at local address 10.0.0.99 and an external Cisco CallManager 
at 172.29.1.77, where TCP port 2748 is the Cisco CallManager. The heartbeat interval for the session is 
120 seconds.

hostname# # 

show ctiqbe

Total: 1

        LOCAL           FOREIGN         STATE   HEARTBEAT

---------------------------------------------------------------

1       10.0.0.99/1117  172.29.1.77/2748        1       120

        ----------------------------------------------

        RTP/RTCP: PAT xlates: mapped to 172.29.1.99(1028 - 1029)

        ----------------------------------------------

        MEDIA: Device ID 27     Call ID 0

               Foreign 172.29.1.99      (1028 - 1029)

               Local   172.29.1.88      (26822 - 26823)

        ----------------------------------------------

The CTI device has already registered with the CallManager. The device internal address and RTP 
listening port is PATed to 172.29.1.99 UDP port 1028. Its RTCP listening port is PATed to UDP 1029.

The line beginning with 

RTP/RTCP: PAT xlates:

 appears only if an internal CTI device has registered 

with an external CallManager and the CTI device address and ports are PATed to that external interface. 
This line does not appear if the CallManager is located on an internal interface, or if the internal CTI 
device address and ports are translated to the same external interface that is used by the CallManager.

The output indicates a call has been established between this CTI device and another phone at 
172.29.1.88. The RTP and RTCP listening ports of the other phone are UDP 26822 and 26823. The other 
phone locates on the same interface as the CallManager because the ASA does not maintain a CTIQBE 
session record associated with the second phone and CallManager. The active call leg on the CTI device 
side can be identified with Device ID 27 and Call ID 0.

Содержание ASA 5512-X







































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ASA 5512-X

Advantech ACP-4010 User Manual preview
ACP-4010
Бренд: Advantech Страницы: 52
Extreme Networks Summit Virtual Installation Manual preview
Summit Virtual
Бренд: Extreme Networks Страницы: 22
Raidon Stardom ST2-TB Quick Installation Manual preview
Stardom ST2-TB
Бренд: Raidon Страницы: 2
National Instruments NI cRIO-9074XT User Manual And Specifications preview
NI cRIO-9074XT
Бренд: National Instruments Страницы: 25
National Instruments PXI NI PXI-1052 User Manual preview
PXI NI PXI-1052
Бренд: National Instruments Страницы: 70
National Instruments SCXI-1000 User Manual preview
SCXI-1000
Бренд: National Instruments Страницы: 43
National Instruments SCXI-1373 Installation Manual preview
SCXI-1373
Бренд: National Instruments Страницы: 4
iStarUSA E1M4 Product Quick Manual preview
E1M4
Бренд: iStarUSA Страницы: 3
iStarUSA E2M8 Product Quick Manual preview
E2M8
Бренд: iStarUSA Страницы: 3
iStarUSA D-400-7 Product Quick Manual preview
D-400-7
Бренд: iStarUSA Страницы: 3
iStarUSA D-400-7P Product Quick Manual preview
D-400-7P
Бренд: iStarUSA Страницы: 3
iStarUSA D-414 Product Quick Manual preview
D-414
Бренд: iStarUSA Страницы: 3
iStarUSA D-400-6 Product Quick Manual preview
D-400-6
Бренд: iStarUSA Страницы: 3
iStarUSA D-300L-FR Product Quick Manual preview
D-300L-FR
Бренд: iStarUSA Страницы: 3
iStarUSA D-300-S5 Product Quick Manual preview
D-300-S5
Бренд: iStarUSA Страницы: 3
iStarUSA D-300-PFS Quick Manual preview
D-300-PFS
Бренд: iStarUSA Страницы: 3
iStarUSA D-206 Product Quick Manual preview
D-206
Бренд: iStarUSA Страницы: 3
iStarUSA D-200L-FS Product Quick Manual preview
D-200L-FS
Бренд: iStarUSA Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды