manualshive.com logo in svg

Cisco ASA 5512-X, Руководство по настройке

Поделиться
Скачать
Cisco ASA 5512-X Скачать руководство пользователя страница 210

 

8-18

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 8      Inspection for Voice and Video Protocols

  RTSP Inspection

RTSP Inspection Overview

The RTSP inspection engine lets the ASA pass RTSP packets. RTSP is used by RealAudio, 
RealNetworks, Apple QuickTime 4, RealPlayer, and Cisco IP/TV connections. 

Note

For Cisco IP/TV, use RTSP TCP ports 554 and 8554.

RTSP applications use the well-known port 554 with TCP (rarely UDP) as a control channel. The ASA 
only supports TCP, in conformity with RFC 2326. This TCP control channel is used to negotiate the data 
channels that are used to transmit audio/video traffic, depending on the transport mode that is configured 
on the client.

The supported RDT transports are: rtp/avp, rtp/avp/udp, x-real-rdt, x-real-rdt/udp, and x-pn-tng/udp.

The ASA parses Setup response messages with a status code of 200. If the response message is traveling 
inbound, the server is outside relative to the ASA and dynamic channels need to be opened for 
connections coming inbound from the server. If the response message is outbound, then the ASA does 
not need to open dynamic channels. 

Because RFC 2326 does not require that the client and server ports must be in the SETUP response 
message, the ASA keeps state and remembers the client ports in the SETUP message. QuickTime places 
the client ports in the SETUP message and then the server responds with only the server ports. 

RTSP inspection does not support PAT or dual-NAT. Also, the ASA cannot recognize HTTP cloaking 
where RTSP messages are hidden in the HTTP messages. 

RealPlayer Configuration Requirements

When using RealPlayer, it is important to properly configure transport mode. For the ASA, add an 

access-list

 command from the server to the client or vice versa. For RealPlayer, change transport mode 

by clicking 

Options

>

Preferences

>

Transport

>

RTSP

 

Settings

.

If using TCP mode on the RealPlayer, select the 

Use TCP to Connect to Server

 and 

Attempt to use 

TCP for all content

 check boxes. On the ASA, there is no need to configure the inspection engine. 

If using UDP mode on the RealPlayer, select the 

Use TCP to Connect to Server

 and 

Attempt to use 

UDP for static content

 check boxes, and for live content not available via multicast. On the ASA, add 

an 

inspect rtsp

 

port 

command.

Limitations for RSTP Inspection

The following restrictions apply to the RSTP inspection.

•

The ASA does not support multicast RTSP or RTSP messages over UDP.

•

The ASA does not have the ability to recognize HTTP cloaking where RTSP messages are hidden 
in the HTTP messages. 

•

The ASA cannot perform NAT on RTSP messages because the embedded IP addresses are contained 
in the SDP files as part of HTTP or RTSP messages. Packets could be fragmented and the ASA 
cannot perform NAT on fragmented packets. 

•

With Cisco IP/TV, the number of translates the ASA performs on the SDP part of the message is 
proportional to the number of program listings in the Content Manager (each program listing can 
have at least six embedded IP addresses). 

Содержание ASA 5512-X







































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды