manualshive.com logo in svg

Cisco 2975 - Catalyst LAN Base Switch, Руководство по настройке программного обеспечения

Коммутатор Cisco 2975 Catalyst LAN Base - надежное решение для сетевых потребностей вашего бизнеса. Предлагаемая бесплатно инструкция по установке оборудования поможет вам быстро и правильно настроить коммутатор. Скачать ее можно на нашем веб-сайте. manualshive.com.

Поделиться
Скачать
background image

 

12-3

Catalyst 2975 Switch Software Configuration Guide

OL-19720-02

Chapter 12      Configuring Interface Characteristics

Understanding Interface Types

Supported access ports:

  •

Static access ports are manually assigned to a VLAN (or through a RADIUS server for use with 
IEEE 802.1x). For more information, see the 

“802.1x Authentication with VLAN Assignment” 

section on page 10-17

. 

  •

VLAN membership of dynamic access ports is learned through incoming packets. By default, a 
dynamic access port is not a member of any VLAN. Traffic forwarding to and from the port is 
enabled only when the port VLAN membership is discovered. Dynamic access ports on the switch 
are assigned to a VLAN by a VLAN Membership Policy Server (VMPS). The VMPS can be a 
Catalyst 6500 series switch. The Catalyst 2975 switch cannot be a VMPS server. 

You can also configure an access port with an attached Cisco IP Phone to use one VLAN for voice traffic 
and another VLAN for data traffic from a device attached to the phone. For more information about 
voice VLAN ports, see 

Chapter 14, “Configuring Voice VLAN.”

 

Trunk Ports

A trunk port carries the traffic of multiple VLANs and by default is a member of all VLANs in the VLAN 
database. 

The switch supports only 802.1Q trunk ports. An 802.1Q trunk port supports simultaneous tagged and 
untagged traffic. The trunk port is assigned a default port VLAN ID (PVID), and all untagged traffic 
travels on the port default PVID. All untagged traffic and tagged traffic with a NULL VLAN ID belong 
to the port default PVID. A packet with a VLAN ID equal to the outgoing port default PVID is sent 
untagged. All other traffic is sent with a VLAN tag.

Although by default, a trunk port is a member of every VLAN known to the VTP, you can limit VLAN 
membership by configuring an allowed list of VLANs for each trunk port. The list of allowed VLANs 
affects only the associated trunk port. By default, all possible VLANs (VLAN ID 1 to 4094) are in the 
allowed list. A trunk port can become a member of a VLAN only if VTP knows of the VLAN and if the 
VLAN is enabled. If VTP learns of a new, enabled VLAN and the VLAN is in the allowed list, the trunk 
port automatically becomes a member of that VLAN. Traffic is forwarded to and from the trunk port for 
that VLAN. If VTP learns of an enabled VLAN that is not in the allowed list for a trunk port, the port 
does not become a member of the VLAN, and traffic for the VLAN is not forwarded to or from the port.

For more information about trunk ports, see 

Chapter 13, “Configuring VLANs.”

 

Switch Virtual Interfaces

A switch virtual interface (SVI) represents a VLAN of switch ports as one interface to the routing or 
bridging function in the system. You can associate only one SVI with a VLAN. You configure an SVI 
for a VLAN only to route between VLANs or to provide IP host connectivity to the switch. 

By default, an SVI is created for the default VLAN (VLAN 1) to permit remote switch administration. 
Additional SVIs must be explicitly configured. 

Note

You cannot delete interface VLAN 1.

SVIs provide IP host connectivity only to the system.Beginning with Cisco IOS Release 12.2(55)SE, you 
can enable routing and configure static routes on SVIs. 

Содержание 2975 - Catalyst LAN Base Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2975 - Catalyst LAN Base Switch

Edge-Core AS9926-24D Quick Start Manual preview
AS9926-24D
Бренд: Edge-Core Страницы: 12
JAR Systems MD-5135 Installing preview
MD-5135
Бренд: JAR Systems Страницы: 2
Surefire ST07 User Manual preview
ST07
Бренд: Surefire Страницы: 2
Accton Technology ES4710BD User Manual preview
ES4710BD
Бренд: Accton Technology Страницы: 547
Pilz PSEN 1.2p-25 Operating Instructions Manual preview
PSEN 1.2p-25
Бренд: Pilz Страницы: 8
ROSSMA IIOT-AMS Tilt Counter Operation Manual preview
IIOT-AMS Tilt Counter
Бренд: ROSSMA Страницы: 13
J-Tech Digital JTD-3003 User Manual preview
JTD-3003
Бренд: J-Tech Digital Страницы: 13
BCXLAB LYNQ User Manual preview
LYNQ
Бренд: BCXLAB Страницы: 6
Lex PowerGATE LELTS-1 Series Installation Instructions & User Manual preview
PowerGATE LELTS-1 Series
Бренд: Lex Страницы: 12
Unifore POE4100P User Manual preview
POE4100P
Бренд: Unifore Страницы: 8
AV Access 4KSW21-L User Manual preview
4KSW21-L
Бренд: AV Access Страницы: 16
ICP DAS USA RS-405/405F User Manual preview
RS-405/405F
Бренд: ICP DAS USA Страницы: 70
Gude Expert Power Control NET 24x Manual preview
Expert Power Control NET 24x
Бренд: Gude Страницы: 25
LINK-MI LM-HD808 Operating Instructions Manual preview
LM-HD808
Бренд: LINK-MI Страницы: 18
MaxLink PSAT-6-4P-250 Quick Installation Manual preview
PSAT-6-4P-250
Бренд: MaxLink Страницы: 2
ATEN CS1942 Quick Start Manual preview
CS1942
Бренд: ATEN Страницы: 2
GE Cync Installation Manual preview
Cync
Бренд: GE Страницы: 21
GE SBM Instructions Manual preview
SBM
Бренд: GE Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды