Cisco 2975 - Catalyst LAN Base Switch, Руководство по настройке программного обеспечения

Страница: 227 / 982

9-31
Catalyst 2975 Switch Software Configuration Guide
OL-19720-02
Chapter 9 Configuring Switch-Based Authentication
Controlling Switch Access with RADIUS
Step 3
aaa authentication login { default
| list-name } method1 [ method2... ]
Create a login authentication method list.
•
To create a default list that is used when a named list is not specified in the
login authentication command, use the default keyword followed by the
methods that are to be used in default situations. The default method list is
automatically applied to all ports.
• For list-name , specify a character string to name the list you are creating.
•
For method1... , specify the actual method the authentication algorithm
tries. The additional methods of authentication are used only if the
previous method returns an error, not if it fails.
Select one of these methods:
–
enable —Use the enable password for authentication. Before you can
use this authentication method, you must define an enable password
by using the
enable password global configuration command.
–
group radius —Use RADIUS authentication. Before you can use this
authentication method, you must configure the RADIUS server. For
more information, see the
“Identifying the RADIUS Server Host”
section on page 9-28 .
–
line —Use the line password for authentication. Before you can use
this authentication method, you must define a line password. Use the
password password line configuration command.
– local —Use the local username database for authentication. You must
enter username information in the database. Use the username name
password global configuration command.
–
local-case —Use a case-sensitive local username database for
authentication. You must enter username information in the database
by using the
username password global configuration command.
– none —Do not use any authentication for login.
Step 4
line [ console | tty | vty ]
line-number [ ending-line-number ]
Enter line configuration mode, and configure the lines to which you want to
apply the authentication list.
Step 5 login authentication { default |
list-name }
Apply the authentication list to a line or set of lines.
•
If you specify default , use the default list created with the aaa
authentication login command.
•
For list-name , specify the list created with the aaa authentication login
command.
Step 6 end Return to privileged EXEC mode.
Step 7 show running-config Verify your entries.
Step 8
copy running-config
startup-config (Optional) Save your entries in the configuration file.
Command Purpose