Ciara Kronos 600 X79-KA SERIES Скачать руководство пользователя страница 176

Страница: 176 / 228

3-54

Chapter 3: BIOS setup

Chapter

3.10.4

ASUS BIOS Updater

The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also

allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or

gets corrupted during the updating process.

The succeeding utility screens are for reference only. The actual utility screen displays may

not be same as shown.

Before updating BIOS

Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and

single partition.

Download the latest BIOS file and BIOS Updater from the ASUS website at http://

support.asus.com and save them on the USB flash drive.

•

NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS

Updater to a hard disk drive or USB flash drive in NTFS format.

•

Do not save the BIOS file to a floppy disk due to low disk capacity.

Turn off the computer and disconnect all SATA hard disk drives (optional).

Booting the system in DOS environment

Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.

Boot your computer. When the ASUS Logo appears, press <F8> to show the

BIOS

Boot Device Select Menu

. Insert the support DVD into the optical drive and select the

optical drive as the boot device.

Please select boot device:

SATA: XXXXXXXXXXXXXXXX

USB XXXXXXXXXXXXXXXXX

UEFI: XXXXXXXXXXXXXXXX

Enter Setup

↑

and

↓

to move selection

ENTER to select boot device

ESC to boot using defaults

When the

Make Disk

menu appears, select the

FreeDOS command prompt

item by

pressing the item number.

At the FreeDOS prompt, type

and press <Enter> to switch the disk from

Drive C (optical drive) to Drive D (USB flash drive).

Welcome to FreeDOS (http://www.freedos.org)!

C:\>d:

D:\>

Содержание Kronos 600 X79-KA SERIES





































































































































































































































Результаты поиска

Содержание Kronos 600 X79-KA SERIES

Отзывы:

Бренды по названию

Популярные бренды

Ciara Kronos 600 X79-KA SERIES, Руководство пользователя

Результаты поиска

Содержание Kronos 600 X79-KA SERIES

Отзывы:

Бренды по названию

Популярные бренды