Ciara Kronos 600 X79-KA SERIES Скачать руководство пользователя страница 175

Страница: 175 / 228

ASUS P9X79 WS

3-53

Chapter

•

This function can support devices such as a USB flash disk with FAT 32/16 format and

single partition only.

•

DO NOT shut down or reset the system while updating the BIOS to prevent system

boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select

the

Load Optimized Defaults

item under the

Exit

menu. See section

3.9 Exit Menu

for

details.

3.10.3

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the

BIOS file when it fails or gets corrupted during the updating process. You can restore a

corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains

the BIOS file.

The BIOS file in the motherboard support DVD may be older than the BIOS file published

on the ASUS official website. If you want to use the newer BIOS file, download the file at

support.asus.com and save it to a USB flash drive.

Recovering the BIOS

To recover the BIOS:
1.

Turn on the system.

Insert the motherboard support DVD to the optical drive, or the USB flash drive

containing the BIOS file to the USB port.

The utility automatically checks the devices for the BIOS file. When found, the utility

reads the BIOS file and enters ASUS EZ Flash 2 utility automatically.

The system requires you to enter BIOS Setup to recover BIOS setting. To ensure

system compatibility and stability, we recommend that you press <F5> to load default

BIOS values.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause

system boot failure!

Содержание Kronos 600 X79-KA SERIES





































































































































































































































Результаты поиска

Содержание Kronos 600 X79-KA SERIES

Отзывы:

Бренды по названию

Популярные бренды

Ciara Kronos 600 X79-KA SERIES, Руководство пользователя

Результаты поиска

Содержание Kronos 600 X79-KA SERIES

Отзывы:

Бренды по названию

Популярные бренды