Chromasens CD40127_R02 allPIXA_pro_User Manual.docx
82
Gamma
A gamma correction table is applied to the image.
video_out_level = video_in_level
1/Gamma
This is valid for values > 0.4. If 0.1 is selected for the gamma value, a
special table for sRGB conversion is used; with the value 0.2 a special
table for special multi-spectral applications is used.
To disable gamma correction, set
Gamma
to 0.
Output format
The camera can be set to output color or gray images. If set to gray,
only one Camera Link connection is used. The data is transmitted on
Camera Link port 1. Port 2 is idle.
For a detailed description of the transmission of data according to the
Camera Link specification, see section 4.5.2.
Transfer and burn setting:
To transfer your setting into camera memory, click
Save volatile
.
Alternatively, you can click
Transfer setting to camera
on the toolbar, or press
F9
.
Changes get lost if you select a different setting, or if you reset the camera or switch it off.
To burn your setting permanently into the camera, click
. Alternatively,
you can transfer the setting to the camera and then click
Burn setting permanently
on
the toolbar, or press
F10
.
Restoring the default factory setting:
By clicking
you can overwrite the current setting with the setting used for the
commissioning of the camera at the Chromasens production facility. This only affects the
currently active setting.
Obtaining camera information:
To obtain camera information, click
Display camera information
. The following
dialog box is shown:
If there are any problems with the camera or the parameter settings, it is very helpful for the
Chromasens support to obtain the camera information.
To add this information to an email to Chromasens support, click
Copy to clipboard
and
paste the information into your email.Perform a white and tap balancing on the camera
