chromasens allPIXA pro, Руководство пользователя

Страница: 126 / 227

Chromasens CD40127_R02 allPIXA_pro_User Manual.docx 126
4

On the toolbar, click Show settings , and then click White control in the tree view.

Select the Enable continuous white control check box.

In the Position and mode for white reference mark list, select the tap for white
control.

Make sure that the Use sync mode check box is cleared:

Specify target values in the Target white reference values area.
If the white target is placed at the borders of the image, the values may be lower than in
the center.
5

Wait for a balanced image

Check for saturation

Refresh the data in CST

Set the initial gaining values

Burn the setting
6

Check the function by lowering the light in the control zone, for example by a
shadow.