Chison Q9 Скачать руководство пользователя страница 97

Страница: 97 / 201

Q9 Digital Color Doppler Ultrasound System

5.3.1.4 Pediatric Measurement in B mode

Hip

Hip is used for evaluating the abnormity of the cotyle. In order to make measurement, user has to draw

three lines on the image responding to the anatomy. The system will calculate the angles automatically.

Operation Method:

Select HIP from Pediatric submenu on CALC menu. Press Enter key to select it.

The first line D1 will be displayed on the screen and use the Trackball to move the line.

The second line D2 will be displayed on the screen, repeat the above procedure to fix the second

line and third line D3. The angles between these three lines will be displayed on the screen.

Note:

is the angle between the D1 and D2(acute angle).

is the angle between D1 and D3(acute angle)

5.3.1.5 Small Parts Measurement in B mode

Small Parts Measurement is the same as the normal Measurement.

Содержание Q9










































































































































































































Результаты поиска

Содержание Q9

Отзывы:

Chison Q9, Руководство по эксплуатации, Страница: 97 / 201

Результаты поиска

Содержание Q9

Отзывы: