Chison Q9 Скачать руководство пользователя страница 31

Страница: 31 / 201

Q9 Digital Color Doppler Ultrasound System

Carefully position the probe cord so it is free to move and is not resting on the floor.

When the probe is connected, the system will be automatically recognized.

CAUTION:

Fault conditions can result in electric shock hazard. DO NOT touch the surface of probe connector

that is exposed when the probe is removed. DO NOT touch the patient when connecting or

disconnecting a probe.

Take precautions with probe cables. DO NOT bend the cable acutely.

Fig.3-2 a Probe connector “Unlock” status Fig.3-2 b Probe connector “Lock” status

Deactivating the Probe

When deactivating the probe, the probe is automatically placed in a standby mode.

To deactivate a probe:

Ensure the system is in “Transducer Selection” interface. If necessary, press the PROBE-key to return. .

Gently wipe off the excess gel from the probe surface.

Carefully slide the probe toward the probe holder, and place the probe gently in the probe holder.

Disconnecting the Probe

Probes can be disconnected when the system is “Transducer Selection” interface.

To disconnect a probe:

Turn the connector locking lever to an “Unlock” position.

Pull the probe and connector straight out of the probe port.

Carefully slide the probe and connector away from the probe port.

Ensure that the head of the probe is clean before placing the probe in its storage box.

Transporting the Probe

Содержание Q9










































































































































































































Результаты поиска

Содержание Q9

Отзывы:

Chison Q9, Руководство по эксплуатации, Страница: 31 / 201

Результаты поиска

Содержание Q9

Отзывы: