Chison Q9, Руководство по эксплуатации, Страница: 28 / 201

Q9 Digital Color Doppler Ultrasound System
22
Use extra care when transporting the system in a vehicle. After preparing the system as described above, take the
following additional precautions:
Before transporting, place the system in its original storage case.
Ensure that the system is firmly secured while inside the vehicle.
Load the unit abroad the vehicle carefully and over its center of gravity. Keep the storage case still and
upright.
Secure that the system firmly with straps or as directed within the vehicle to prevent movement during
transport. Any movement, coupled with the weight of the system, could cause it to break loose.
Drive carefully to prevent damage from vibration. Avoid unpaved roads, excessive speeds, and erratic
stops or starts.
3.4. Powering the System
3.4.1. Acclimation Time
After being transported, the unit requires one hour for each 2.5 º increment if its temperature is below 10 ºC or
above 40 ºC.
NOTE:
Please keep at least 20 to 30 cm spare space away from the back of the system to ensure
well ventilation. Otherwise, with the increasing of the temperature inside the unit,
malfunction may occur.
3.4.2. Connecting and Using the System
To connect the system to the electrical supply:
Check the power voltage input labeling at rear panel of the system.
Ensure that the wall outlet is the appropriate type and well grounded.
Ensure that the system powers off.
Unwrap the power cord, and allow sufficient slack in the cable so that the plug will not be pulled out of
the wall outlet if the system is moved slightly.
Attach the power plug to the system and secure it in place by using the retaining clamp.
Push the power plug securely into the wall outlet.
NOTE:
Only use the power cord provided by Manufacturer.
Use caution to ensure that the power cord does not disconnect during system use.
If the system is accidentally unplugged, data may be lost.