Chison Q9 Скачать руководство пользователя страница 75

Страница: 75 / 201

Q9 Digital Color Doppler Ultrasound System

Service: Click the drop list to select storage function.

AE title: Name the server at will

Host: Set the IP of the service host

Port: Make the port of the work station the same as the port of the server.

Alias: The name of current link

Time out: time delay

Mode: batch, follow, manual selectable

Batch: all the saved images in current exam will be sent to the server in one time

Follow: When one image is saved, the system will send this image to the server.

Manual: The user has to select the image by manual.

After all the settings are completed, please click OK to save current setting. Click clear to clear all the setting.

Clicking cancel will not save the current setting.

DICOM storage

Batch mode: In batch mode, when the patient finishes his exam, press End key to end the current exam. All

the saved images will be saved as DCM format and sent to the server automatically.

Follow: In follow mode, during the exam, press

key to save the image. The current image will be

saved as DCM format and sent to the server.

Manual: In manual mode, the user has to select the image by manual and do DICOM transfer. Press

key to enter into review interface. Select the images need to be sent, press

key to send.

DICOM print

DICOM print parameters setting.

Содержание Q9










































































































































































































Результаты поиска

Содержание Q9

Отзывы:

Chison Q9, Руководство по эксплуатации, Страница: 75 / 201

Результаты поиска

Содержание Q9

Отзывы: