Chison Q9, Руководство по эксплуатации, Страница: 43 / 201

Q9 Digital Color Doppler Ultrasound System
37
Chapter 4 Imaging
4.1. General Description
How to begin an exam
How to select a probe and an application.
How to optimize the image
The operations after getting the image: adding annotation and body mark, storing and recalling the image
4.2. Beginning an Exam
Begin an exam by entering new patient information. You should enter as much information as possible, such as
patient ID, patient name.
The patient’s name and ID number are retained with each patient’s image and transferred with each image during
archiving or hard copy printing.
CAUTION:
To avoid patient identification errors, always verify the identification with the patient. Make sure
the correct patient identification appears on all screens and hard copy prints.
4.2.1. Selecting a Probe and an Application
The system has two built-in probe connectors, so it can connect two probes at the same time.
Press PROBE-key to back to “Transducer Selection” interface.
1: Select the proper probe.
2: Select the proper Application.
3: Double click the preset to enter into the default preset, or click the user defined preset at the bottom of this
interface.