Chison Q9 Скачать руководство пользователя страница 76

Страница: 76 / 201

Q9 Digital Color Doppler Ultrasound System

Service: Click the drop list to select print function.

AE title: Name the server at will

Host: Set the IP of the server

Port: Make the port of the work station the same as the port of the server.

Alias: The name of current link

Time out: time delay

Mode: batch, follow, manual selectable

Batch: all the saved images in current exam will be sent to the server and printed automatically in one

time

Follow: When one image is saved, the system will send this image to the server and print it.

Manual: The user has to select the image by manual and print it.

After all the settings are completed, please click OK to save current setting. Click clear to clear all the setting.

Clicking cancel will not save the current setting.

DICOM print

Batch mode: In batch mode, when the patient finishes his exam, press End key to end the current exam. All

the saved images will be saved as DCM format and sent to the server automatically to be printed.

Follow: In follow mode, during the exam, press save key to save the image. The current image will be saved

as DCM format and sent to the server to be printed.

Manual: In manual mode, the user has to select the image by manual and do DICOM transfer. Press browse

key to enter into review interface. Select the images need to be sent, click

icon to print.

Содержание Q9










































































































































































































Результаты поиска

Содержание Q9

Отзывы:

Chison Q9, Руководство по эксплуатации, Страница: 76 / 201

Результаты поиска

Содержание Q9

Отзывы: