Chison Q9 Скачать руководство пользователя страница 86

Страница: 86 / 201

Q9 Digital Color Doppler Ultrasound System

5)The measurement result will appear on the screen automatically.

M Time

1) In M Cine mode, press the DIST-key to enter M distance measurement. The ”will appear on the

screen.

2) Rotate SK1

，

choose M time.

3) Move the trackball to move the cursor, press Enter-key to fix it.

4) One dotted line and second cursor will appear.

5) Move the trackball to the end point in the dotted line horizontally, press the Enter-key to fix the cursor.

6) The measurement result will appear on the screen automatically.

5.3

Measurement and Calculation

There are Corresponding measurement menu in different modes. Press Calc-key to recall the measurement menu.

Press Change-key to do exchange during the measurements menus of different modes. Press Exit key to close

the measurement menu.

Move the trackball to select the measurement item on the measurement menu and do the measurement in the

image.

After finishing the measurement, press Report-key to generate the report template to view the measurement

results or print the report.

5.3.1

Measurement in B mode

Press Calc-Key to enter into measurement package menu. Press Change-Key to change measurement package .

5.3.1.1.

General Measurement in B mode

Содержание Q9










































































































































































































Результаты поиска

Содержание Q9

Отзывы:

Chison Q9, Руководство по эксплуатации, Страница: 86 / 201

Результаты поиска

Содержание Q9

Отзывы: