![background image](http://html.mh-extra.com/html/chevrolet/trailblazer/trailblazer_service-manual_2597679435.webp)
Power steering gear assembly removal and installation
15. Remove the power steering gear assembly from the vehicle.
16. Remove the inner shaft from the differential carrier.
17. Detach the differential carrier from the oil pan and secure it to the frame.
18. Remove the oil pan from the engine.
19. Remove the differential carrier from the vehicle.
To Install:
1. Secure the differential carrier to the frame.
2. Install the oil pan onto the engine.
3. Attach the differential carrier to the oil pan. Torque the bolts to
63 ft-lb (85 Nm)
.
4. Install the inner shaft into the differential carrier.
5. Install the power steering gear assembly into the vehicle.
6. Detach the front wheel drive shafts from the frame.
7. Detach the front shock modules and steering knuckle from their supports.
8. Install the front wheel drive shafts into the differential carrier.
9. Install the vent hose onto the differential carrier.
10. Install the upper shock module retaining nuts. Torque the nuts to
74 ft-lb (100 Nm)
.
11. Install the steering knuckle onto the upper control arm.
12. Install the nut and bolt into the upper ball pinches. Torque the nut and bolt to
30 ft-
lb (40 Nm)
.
Содержание TrailBlazer
