Cheetah Medical Starling SV Скачать руководство пользователя страница 43

Страница: 43 / 105

after the manual entry and will also serve to derive the MAP-related parameters,

namely TPR, TPRI, CP and CPI.

Enter SpO2 and Hgb

- From the Side Menu the user can manually enter the Hgb

and SPO2 through the dial box window. Following the entry of these two parameters

the system will update DO2I.

Switch Display -

this option allows the user to toggle through the different run

screens in order to view all changes in real time. Use the Switch Display option to

navigate between the Run screen, the Dashboard, the Numerical Display the Trend

Display and Protocol display screens. Additional options to switch displays are by

pressing the knob and then scrolling it, or by sliding the finger vertically on the screen.

Note

The Protocol Display screen will only be enabled in case a protocol was run

successfully during a test.

Exit -

this option navigates back to the Main Menu screen.

In order to begin monitoring a patient, open the Run screen by entering the new

patient information or by selecting an existing patient from the list that appears on the

Starling SV's Main Menu screen, then press the knob (as indicated on the screen's

menu bar's help line - see figure 2.2). In order to pause select the Pause option from

the pop-up menu. In order to completely stop the test choose the Stop option on the

Run screen's pop-up menu. A window will then emerge, state that a test is being run

and ask the user to confirm whether or not to end it. If a choice is made to stop the

test - the stop icon will replace the play icon on the run bar at the top left side of the

screen.

Note

All tests can be started and paused using the pop-up menu options.

On the lower section of the screen 3 oscillograms run during a measurement: two

ECG/time-marker channels and one Starling SV channel. In addition, numeric

display boxes appear on the top and side of the screen. During measurement the

system will display results as set up by the user.

Note

A refresh clock appears on the Run bar on all Run screens that counts the

number of cycles remaining until the results refresh and appear on the screen.

SpO2

Start/Stop SpO2 -

this option allows the user to start the SpO2 module to measure

automatically SpO2 measurements. In this working mode the SpO2 module will

continuously display SpO2 results. If Hemoglobin was entered, the Do2I shall be

calculated continuously as well at the same rate the CI is updated.

Содержание Starling SV










































































































Результаты поиска

Содержание Starling SV

Отзывы:

Бренды по названию

Популярные бренды

Cheetah Medical Starling SV, Руководство пользователя

Результаты поиска

Содержание Starling SV

Отзывы:

Бренды по названию

Популярные бренды