Cheetah Medical Starling SV Скачать руководство пользователя страница 25

Страница: 25 / 105

Precautions

CAUTION

Strictly follow the warning instructions in this manual.

CAUTION

The instrument is fragile; to prevent damage please handle with care

and avoid dropping it. Be careful while unpacking. For system repacking instructions

please refer to page 75 on this guide.

CAUTION

Ensure that the system is only used by a trained person familiar with all

system operating procedures. Hospital personnel should complete a training program

prior to operating the Starling SV.

CAUTION

To avoid damage to the instrument or sensors, be careful of liquid

spillage while cleaning.

CAUTION

Do not expose the instrument or sensors to sprays, liquids or any other

type of solvent.

CAUTION

To avoid damage to the surface of the instrument or sensors:



Avoid excessive pressure when cleaning the lettering.



Do not use solvents or detergents for cleaning.



Do not clean the sensors with an abrasive.

Note

Scratches on the surface of the sensors will cause inaccurate data recording.

CAUTION

To avoid damage to the LCD screen - do not expose the instrument to

direct sunlight for long periods of time.

CAUTION

User is prohibited from changing, adding, removing or disassembling

any system parts. Warranty shall not apply to any defects, failure or damage caused by

improper use and/or improper or inadequate maintenance and care.

CAUTION

The unit is classified as Class IIb, continuously operated, ordinary

equipment with applied part and with signal input output parts. The device is not

intended for use in the presence of flammable mixtures.

Note

The contents of this manual are subject to change without prior notice for

improvement of analysis precision.

Note

Used sensors should not be placed with common household waste products.

Contact local authorities for the location of a chemical waste collection program

nearest you.

Содержание Starling SV










































































































Результаты поиска

Содержание Starling SV

Отзывы:

Бренды по названию

Популярные бренды

Cheetah Medical Starling SV, Руководство пользователя

Результаты поиска

Содержание Starling SV

Отзывы:

Бренды по названию

Популярные бренды