Cheetah Medical Starling SV Скачать руководство пользователя страница 40

Страница: 40 / 105

corrected to the patient’s BSA. Once selected, a small 'V' sign will appear on the left

hand side of the 'Index Display' option on the pop-up menu

Time Scale -

this option enables the user to create wider or narrower timescale view,

for example in order to focus on a short period of interest or to visualize many hours

of monitoring and observe a longer-term trend. The user has a choice of different

time-scale options. This can also be done by moving two fingers apart/towards each

other on the touch screen when trends are displayed.

Session Controls

Initiate Calibration -

This option enables the user to run a new patient calibration

process on the system while a test is ongoing.

Start –

by choosing this option the user will begin running a new test. Another way to

do so is by clicking the knob while on the main Run screen as long as a Test is not

already running at the time.

Pause

– this option allows the user to halt a running test for an unlimited period of

time, without terminating it. The test can be resumed at any time by choosing the

Continue option on the Test Controls' sub menu. When pause is operated, “pause”

indicator will appear in the alerts bar.

Stop -

this option prompts a pop-up screen to confirm the end of the test by the user.

Silence Alarm -

this option allows the user to silence the alarm for two minutes

during a test.

Protocols

The Protocol Wizards guide the user in step-by-step fashion through Starling SV

supported protocols. The Protocol Wizard is designed to simplify administration and

data management related to hemodynamic tests such as the Passive Leg Raise, or

Bolus injection. Once chosen, the tests perform automatically without interruption of

monitoring and will only request user involvement and confirmation where required.

The wizard will track the relevant clinical parameters and will also calculate additional

clinical information to provide the user with the end point of the protocol. A protocol

can be initiated at any stage during a test, except for the calibration phase. Simply

press the Menu button on the Starling SV to access the screen's pop-up menu or just

select the Menu with the touch screen. In addition, the user can start the PLR and the

Bolus Protocols directly from the Challenge stage. If this is selected, the system will

automatically analyze the last 3 minutes of readings to establish whether or not there

is a valid Baseline stage. The system will not allow for a direct challenge stage if the

last 3 minutes readings contain poor signals or excessive movements. When selecting

the 'Protocols' option a sub menu opens with a choice of the following protocols:

PLR test, and Bolus. Once selected, the protocol wizard will appear on screen and

Содержание Starling SV










































































































Результаты поиска

Содержание Starling SV

Отзывы:

Бренды по названию

Популярные бренды

Cheetah Medical Starling SV, Руководство пользователя

Результаты поиска

Содержание Starling SV

Отзывы:

Бренды по названию

Популярные бренды