Challenge Titan 265, Инструкция по эксплуатации

Страница: 25 / 88

6.0 Operation
24
6.9.4 Push-Out Key
The push-out key will move the backgauge forward 5 inches (or to the most forward position) and
then return it to its previous position. This allows paper to be removed from the cutter without putting
hands under the knife and clamp.
Never place hands in the clamp and knife area. Use the push-out key or
the backgauge glide control to move the paper to an area where it can be reached.
6.9.5 Clear Key
The CLEAR key is used to clear error messages and the current entry line.
6.9.6 Enter Key
The ENTER key selects items in the maintenance mode and processes data that has been entered in
the other modes.
6.9.7 Priority Add (X/Y) Key
The priority add key is used for entering fractions when they are combined with whole numbers. The
symbol displayed when this key is pressed is the underline symbol “_”. An example of a number
entered using the priority add key is 1_1/2.
6.9.8 Soft-Keys
The soft-keys are labeled as A, B, C, and D. The definition for these keys change depending on the
operating mode. The function of the key can be found on the bottom of the display screen.
6.9.9 Arrow Keys
The four arrow keys can be used in almost all screens. The arrow keys are primarily used for moving
the cursor around on the screen, or to toggle between highlighted selections. In some screens, the
left arrow key acts as a backspace key. In the send screen, the up and down arrow keys are used to
adjust the clamp pressure.
6.9.10 Contrast Control
The contrast of the display can be adjusted by using the contrast control knob, which is located
directly behind the display panel, sticking out of the display panel cover. To access, open the front
guard, reach in with your left hand until you feel the knob, and adjust the contrast as necessary.
6.10 Manual Backgauge Control
6.10.1 Backgauge Glide Control
The backgauge can be moved manually by use of the backgauge glide control. Press towards the
operator for forward travel and away from the operator for reverse travel. The further away from
center that the actuator is pushed, the faster the backgauge will travel.