Cerus Industrial Titan CI-001-GS2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 76 / 178

9-5
z
Frequency setting via -10 ~ +10V voltage input + 0 ~ 20mA input
Group Code Parameter Name Setting Range Initial Unit
Drive
group
0.00 [Frequency Command] - 0 ~400 0.00 Hz
Frq [Frequency Mode] 5 0 ~ 7 0
ƒ
Select 5 in Frq code of Drive group.
ƒ
Override function available using Main/Auxiliary speed adjustment
ƒ
Related code: I 1 ~ I 5, I 6 ~ I10, I11 ~ I15
Override function is to gain precise control and fast response by combining Main
and Auxiliary speed input. Fast response can be achieved by Main speed and precise
control can be accomplished by Aux. speed if the accuracy of Main/Aux speed is set
differently.
Follow the setting below when Main speed is given via 0 ~ 20mA with Aux. speed
via V1 terminal (–10 ~ 10V).
When override function is used, select the Main/Aux. speed according to loads used.
Group Code Parameter Name Setting Unit
I/O group I 2 [NV input Min voltage] 0 V
I 3 [Frequency corresponding to I 2] 0.00 Hz
I 4 [NV input Max voltage] 10.00 V
I 5 [Frequency corresponding to I 4] 5.00 Hz
I7
[V1 input Min voltage]
0 V
I 8 [Frequency corresponding to I 7] 0.00 Hz
I 9 [V1 input max voltage] 10 V
I10 [Frequency corresponding to I 9] 5.00 Hz
I12 [I input minimum current] 4 mA
I13 [Frequency corresponding to I 12] 0.00 Hz
I14 [I input max current] 20 mA
I15 [Frequency corresponding to I 14] 60.00 Hz
After the above setting is made, if 5V is applied to V1 with 12mA given to terminal I,
output frequency would be 32.5Hz. If –5V is applied to V1 terminal with 12mA given to
terminal I, output frequency would be 27.5Hz.