Cerus Industrial Titan CI-001-GS2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 49 / 178

7-4
z
Function group 1
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adj.
during
run
Page
This parameter sets the highest
frequency the inverter can output.
It is frequency reference for
Accel/Decel (See H70) F21
1)
[Max
frequency] 40 ~ 400
[Hz]
Caution: Any frequency cannot be
set above Max frequency except
Base frequency.
60.00 X 9-21
F22 [Base
frequency] 30 ~ 400
[Hz] The inverter outputs its rated
voltage to the motor at this
frequency (see motor nameplate). 60.00 X 9-17
F23 [Start
frequency] 0 ~ 10
[Hz] The inverter starts to output its
voltage at this frequency.
It is the frequency low limit. 0.50 X 9-21
F24 [Frequency
high/low limit
select] 0 ~ 1 This parameter sets high and low
limit of run frequency. 0 X
F25
2)
[Frequency
high limit] 0 ~ 400
[Hz] This parameter sets high limit of
the run frequency.
It cannot be set above F21 –
[Max frequency]. 60.00 X
9-21
F26
[Frequency
low limit] 0.1 ~ 400
[Hz]
This parameter sets low limit of
the run frequency.
It cannot be set above F25 -
[Frequency high limit] and below
F23 – [Start frequency]. 0.50 X
0 Manual torque boost F27 [Torque
Boost select] 0 ~ 1
1 Auto torque boost
0 X 9-19
F28 [Torque boost
in forward
direction] This parameter sets the amount
of torque boost applied to a motor
during forward run.
It is set in percent of Max output
voltage. 2 X 9-19
F29 [Torque boost
in reverse
direction]
0 ~ 15
[%]
This parameter sets the amount
of torque boost applied to a motor
during reverse run.
It is set as a percent of Max
output voltage 2 X 9-19
1)
: If H40 is set to 3 (Sensorless vector), Max. frequency is settable up to 300Hz.
2)
: Only displayed when F24 (Frequency high/low limit select) is set to 1.