Cerus Industrial Titan CI-001-GS2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 51 / 178

7-6
z
Function group 1
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adj.
during
run
Page
F51
1)
[Electronic
thermal level
for 1 minute] This parameter sets max current
capable of flowing to the motor
continuously for 1 minute.
The set value is the percentage
of H33 – [Motor rated current].
It cannot be set below F52 –
[Electronic thermal level for
continuous]. 150 0
F52
[Electronic
thermal level
for
continuous]
50 ~ 200
[%]
This parameter sets the amount
of current to keep the motor
running continuously.
It cannot be set higher than F51 –
[Electronic thermal level for 1
minute]. 100 0
0 Standard motor having
cooling
fan directly
connected to the shaft
F53 [Motor
cooling
method] 0 ~ 1
1 A motor using a separate
motor to power a cooling
fan.
0 0
12-1
F54 [Overload
warning level] 30 ~ 150
[%] This parameter sets the amount
of current to issue an alarm signal
at a relay or multi-function output
terminal (see I54, I55).
The set value is the percentage
of H33- [Motor rated current]. 150 0
F55 [Overload
warning time] 0 ~ 30
[Sec] This parameter issues an alarm
signal when the current greater
than F54- [Overload warning
level] flows to the motor for F55-
[Overload warning time]. 10 0
12-2
F56 [Overload trip
select] 0 ~ 1 This parameter turns off the
inverter output when motor is
overloaded. 1 0
F57 [Overload trip
level] 30 ~ 200
[%] This parameter sets the amount
of overload current.
The value is the percentage of
H33- [Motor rated current]. 180 0
F58 [Overload trip
time] 0 ~ 60
[Sec] This parameter turns off the
inverter output when the F57-
[Overload trip level] of current
flows to the motor for F58-
[Overload trip time]. 60 0
12-3
1)
: Set F50 to 1 to display this parameter.