Cerus Industrial Titan CI-001-GS2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 178

3-7
3.3 Control terminal specification
Wire size[mm
2
]
T/M Terminal Description
single
wire
Stranded
Screw
size
Torque
[Nm]
Specification
P1~P8 Multi-function input T/M 1-8 1.0 1.5 M2.6 0.4
CM Common Terminal 1.0 1.5 M2.6 0.4
VR Power supply for external
potentiometer 1.0 1.5 M2.6 0.4 Output voltage: 12V
Max output current:
100mA
Potentiometer:1 ~ 5kohm
V1 Input terminal for Voltage
operation 1.0 1.5 M2.6 0.4 Max input voltage:
-12V ~ +12V input
I Input terminal for Current
operation 1.0 1.5 M2.6 0.4 0 ~ 20mA input
Internal resistor: 500
ohm
AM Multi-function analog output
terminal 1.0 1.5 M2.6 0.4 Max output voltage:
11[V]
Max output current:
100mA
MO Multi-function terminal for
open collector 1.0 1.5 M2.6 0.4 Below DC 26V,100mA
MG Ground terminal for
external power supply 1.0 1.5 M2.6 0.4
24 24V External Power Supply 1.0 1.5 M2.6 0.4 Max output current:
100mA
3A Multi-function relay output A
contact 1.0 1.5 M2.6 0.4 Below AC 250V, 1A
3B Multi-function relay output
B contact 1.0 1.5 M2.6 0.4 Below DC 30V, 1A
3C Common for Multi-function
relays 1.0 1.5 M2.6 0.4
Note 1) Tie the control wires more than 15cm away from the control terminals. Otherwise, it interferes
front cover reinstallation.
Note 2) Use Copper wires rated 600V, 75
ഒ
and higher.
Note 3) Use the recommended tightening torque when securing terminal screws.
3A 3B 3C P5 CM P6 P7 P8 VR V1 I AM
MO MG 24 P1 P2 CM P3 P4 S- S+