Cerus Industrial Titan CI-001-GS2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 118 / 178

10-25
z
Parameter Lock
Group Display Parameter Name Setting Range Default Unit
H95 [Parameter lock] - 0 ~ FFFF 0
Function
group 2
H94 [Password register] - 0 ~ FFFF 0
ƒ
This parameter is used to lock the user-set parameters using the password.
See the table below to lock the user-set parameter via the H94 – [Password
Register].
Step Note Keypad display
1 Move to H95 code. H94
2 Press Enter (
z
) key. UL
3
Parameter value can be changed in UL (Unlock)
status.
UL
4 Press Enter (
z
) key. 0
5 Enter the password created in H94 (e.g.: 123). 123
6 Press Enter (
z
) key. L
7
Parameter value cannot be changed in L (Lock)
status.
L
8 Press Enter (
z
) key. H95
See the table below to unlock the user-set parameter via password.
Step Note Keypad display
1 Move to H95 code. H94
2 Press Enter (
z
) key. L
3
Parameter value cannot be changed in L(Lock)
status.
L
4 Press Enter (
z
) key. 0
5 Enter the password created in H94 (e.g.: 123). 123
6 Press Enter (
z
) key. UL
7
Parameter value can be changed in UL (Unlock)
status. While seeing this message…
UL
8 Press Enter (
z
) key. H95