Cerus Industrial Titan CI-001-GS2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 60 / 178

7-15
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adj.
during
run
Page
H85 [2
nd
motor
forward
torque boost]
5 X
H86 [2
nd
motor
reverse
torque boost]
0 ~ 15
[%]
5 X
H87 [2
nd
motor
stall
prevention
level]
30~150
[%] 150 X
H88 [2
nd
motor
Electronic
thermal level
for 1 min]
150 O
H89 [2
nd
motor
Electronic
thermal level
for
continuous]
50~200
[%]
100 O
H90 [2
nd
motor
rated current]
0.1~50
[A] 26.3 X
10-16
H91 [Parameter
read] 0 ~ 1 Copy the parameters from
inverter and save them into
keypad. 0 X
H92 [Parameter
write] 0 ~ 1 Copy the parameters from
keypad and save them into
inverter. 0
X
10-22
This parameter is used to
initialize parameters back to the
factory default value.
0
-
1 All parameter groups are
initialized to factory default
value.
2 Only Drive group is
initialized.
3 Only Function group 1 is
initialized.
4 Only Function group 2 is
initialized.
H93 [Parameter
initialize] 0 ~ 5
5 Only I/O group is
initialized.
0 X 10-23
H94 [Password
register] 0 ~ FFFF Password for H95-[Parameter
lock]. Set as Hexa value.
0 O 10-23
H95 [Parameter
lock] 0 ~ FFFF This parameter is able to lock or
unlock parameters by typing
password registered in H94.
0 O 10-25