Centroid GPIO4D, Инструкция по установке

Страница: 6 / 59

3. Connecting major components on Bench for testing.
(cont)
Powering up for the first time
With the major components all connected, confirm that all
components are resting on a non-conductive surface and turn on your power strip to power up your
components and PC. While powering up, you notice that there are 4 LED's next to the power
connector (see red rectangle below) on the MPU11 that flicker while the MPU11 is initializing. After
15-30 seconds the LED's should be in the following states:
FPGA-OK = Solid green
DSP Debug = Flashing ~1 per sec
DSP -OK = Solid Green
+5V = Solid Green