Centroid GPIO4D, Инструкция по установке

Страница: 15 / 59

7. Bench Testing the MPU11 and GPIO4D
Bench testing the MPU11 and GPIO4D will confirm that the MPU11 and GPIO4D are
operational and that the software has been properly configured to begin the installation
process. Bench Testing is required as it provides a known base configuration that our
support engineers can refer to when trying to diagnose any issues that may have arisen. To
complete Bench Testing, a USB thumb drive and DVM (Digital Volt Meter) is required.
1. Set Home and load benchtest.cnc:
Press the alt-s keys simultaneously to display the
DRO, press F2”Load”, use the arrow keys to select the file benchtest.cnc and press
F10”Load”. If the DRO does not display when you press alt-s, see section 6.5
Clear Any
Existing Faults Before Beginning Bench Testing
NOTE: If benchtest.cnc is not present in the c:\cncm\ncfiles directory it can be
downloaded here:
benchtest.cnc
Once downloaded, copy it to c:\cncm\ncfiles directory
and proceed as described above. When ready to begin Bench Test, your screen should be
as displayed: