Centroid 13126, Инструкция по установке

Страница: 7 / 86

I
NTRODUCTION
This manual describes how to install the Centroid CNC (Computer Numerical Control) system with an OAK CNC Control. The PC
based system provides up to four axes (upgradable to eight axes) of closed loop servo interpolated motion, controlled by industry
standard G-Codes.
The Oak can be used for the CNC control of milling machines, routers, lathes, flame cutters, plasma cutters, laser cutters, water
jet cutters, drill presses, grinders, and other specialized applications.
This installation manual covers the most common Oak hardware setups. For the rest of the manual, we will assume the
installation is a three axis mill.
This system is intended to be installed by competent installers, retro-fitters, and machine tool builders who want to do their own
installation. This installation manual is not intended for casual end users. Users of this manual should be comfortable with the
following:
•
basic wiring
•
reading basic electrical schematics
•
PC skills (copying, pasting, extracting zip files, knowledge of directories)
B
EFORE
Y
OU
B
EGIN
Installing the Centroid CNC12 based Oak Board system is a straight forward process if the directions are followed. Before getting
started, please take the time to familiarize yourself with the schematics, manuals and installation instructions.
While doing the installation, it is very important that you follow the instructions exactly and in order. Doing the installation
incrementally and testing as you go will allow you to immediately isolate the cause of any problems that you may run into.
Additional troubleshooting is included in the appendices.
U
SEFUL
R
ESOURCES
Appendix A includes troubleshooting procedures for various common problems.
If you run into a problem first refer to the troubleshooting procedure, then the Appendix.
Centroid Product Manuals: http://www.centroidcnc.com/centroid_diy/centroid_manuals.html
Oak CNC Standard Schematics: https://www.centroidcnc.com/downloads/oak/centroid_oak_schematic_set.zip
Centroid’s YouTube Channel: Centroid CNC Technical Support
martyscncgarage YouTube video series: FADAL TRM meets Centroid (more to come)
Free community support: Centroid Community CNC Support Forum
Centroid CNC Tech Bulletins: http://www.centroidcnc.com/centroid_diy/tech_bulletins/browse.php
Centroid Allin1DC and Accessories: https://www.centroidcnc.com/centroid_diy/oak_cnc_controller.html
Centroid CNC Components: http://www.centroidcnc.com/centroid_diy/cnc_components.html
Oak Installation Photo Album https://photos.app.goo.gl/RL9DRbY3wzuWJN9L9
Paid factory tech support is available by Phone or Email: Purchase Tech Support
Page 7 of 86 Introduction