Centroid 13126, Инструкция по установке

Страница: 27 / 86

4.2 O
AK
S
PINDLE
B
ENCH
T
EST
Bench testing the Oak will confirm that the Oak is operational and that the software has been properly configured to begin the
installation process. Bench Testing is
required as it provides a known base configuration that our support engineers can refer to
when trying to diagnose any issues that may arise. To complete Bench Testing, a DVM (Digital Volt Meter) is required.
1.
Set Home and load spindlebenchtest.cnc: Home the machine by pressing start. From the main menu press F2-Load.
Use the arrow keys to select the file spindlebenchtest.cnc
1. If spindlebenchtest.cnc is not present in the c:\cncm\ncfiles directory it can be downloaded here:
spindle benchtest.cnc ( http://centroidcnc.com/usersupport/support_files/benchtest/ spindle benchtest.cnc )
2. Download spindlebenchtest.cnc If your web browser does not provide an option to download spindlebenchtest.cnc
and instead displays a bunch of code, copy the code from your web browser into your default text editor (such as
+). Save the file as spindlebenchtest.cnc in the CNC12 root directory (see next step).
3. Place spindlebenchtest.cnc in your CNC12 root directory.
1. Right click on your CNC12 shortcut
2. Click properties as shown in figure 4.2.1.
3. A window will pop up, go to the “shortcut” tab and click “ open file location ” as shown in Figure 4.2.2.
4. Open the folder labeled “ncfiles”. Paste spindlebenchtest.cnc into the ncfiles directory.
5. In the load menu of CNC12 press F5-refresh .
2.
With spindlebenchtest.cnc highlighted, press F10 Accept . If the DRO does not display when you press alt-s, you likely
encountered a fault. See clearing faults is covered in section 4.2.3
Page 27 of 86 Chapter 4 Configuring for a Bench Test
Figure 4.2.1
Right click on
CNC12 and click
“properties”
Figure 4.2.2
Select the “shortcut”
tab and click “Open
File Location”
Figure 4.2.3
Selecting spindlebenchtest.cnc