Centroid 13126, Инструкция по установке

Страница: 20 / 86

10. Installing a PLC program: After the CNC12 software has been installed, the installer will prompt you to install a PLC
program, select “ Yes ”. Click on the “+” signs next to Mill and OAK. Click on “ _Centroid_Standard ”, then click “ Install ” as
shown in Figure 2.5.7.
1. NOTE : If you have a mill, the software should default to _Mill → _OAK → _Centroid_Standard. If you have a Lathe it
should default to _Lathe → _OAK → _Centroid_Standard. Make sure the software is defaulting to the correct
program.
2.
NOTE: The following is a quick reference explaining each PLC program and which schematics work with the program.
The Standard OAK schematics can be downloaded here: Oak CNC Controller Hookup Schematics
The latest version of the Chart is available as Tech bulletin 312 – Standard PLC Program Quick Reference
Page 20 of 86 Chapter 3 Software Installation
Figure 2.5.7
Install the PLC program
TB312 (Rev 0) – Standard PLC Program Quick Reference
Feature Type PLC Program Purpose Schematic
Mill ALLin1DC Standard Centroid-Mill-Standard-ALLIN1DC-r2.src
Standard_ATC Swingarm
Umbrella
S14817
umbrella_no_throwaway-std-io
Custom BP-Boss S14755, S14756, S14757
Lathe ALLin1DC Standard Centroid-Lathe-Standard-ALLIN1DC-r2.src S14758, S14761, S14762
Feature Type PLC Program Purpose Schematic
Mill Oak Standard Centroid-Mill-Standard-OAK-r2.src
Standard_ATC Umbrella Centroid-Mill-Standard-OAK-ATC-Umbrella.src PLC for OAK Board and umbrella ATC S14798, S14804
Lathe Oak Standard Centroid-Lathe-Standard-OAK-r2.src
Custom 8 Tool electric turret oak-lathe-8te-v2.src S14789, S14791,
Purpose: Provide a quick reference of all Centroid Standard PLC programs so end users can choose an appropriate program that matches the system
schematic
Machine
Type
Control
Type
Machine
Features
PLC for ALLIN1DC w/ wireless MPG
and VCP S14745, S14746, S14747,
S14748, S14749, S14750,
S14751, S14752, S14753,
S14754, S14760
Centroid-Mill-Standard-ALLIN1DC-ATC-
Umbrella.src PLC for MPU11 and allin1dc, 16/16
umbrella atc
Centroid-Mill-Standard-ALLIN1DC-ATC-Umbrella-
Skip-First-Count.src PLC for MPU11 and allin1dc,
standardized I/O, 16/16 umbrella atc
with no throwaway count on carousel
reversal
Centroid-Mill-Standard-ALLIN1DC-BP-Boss-
r2.src PLC for ALLIN1DC w/ wireless MPG
and VCP
PLC for ALLIN1DC w/ wireless MPG
and VCP
Machine
Type
Control
Type
Machine
Features
PLC for OAK w/ VCP and wireless
mpg S14765, S14773, S14774,
S14775, S14776, S14783,
S14784, S14785,
PLC for ALLIN1DC w/ wireless MPG
and VCP S14777, S14778, S14780,
S14786, S14787, S14788
Basic Lathe PLC program for OAK
with 8-tool turret