Centroid 13126, Инструкция по установке

Страница: 4 / 86

Basic Safety Procedures and Best Practices
For Motors
Be safely dressed when handling a motor. Wear safety shoes and gloves. Avoid loose clothing which can get caught on the
motor. Be careful not to let hair get caught in the rotary section of the motor. Do not handle the motor with wet hands.
Shut off the power before working on a motor. Wait at least 5 minutes after the motor is shut off before touching any power
terminals.
Ensure that the motor and motor related components are mounted securely. Ensure that the base or frame to which the motor is
mounted to is strong enough.
Do not touch the rotary section of the motor when it is running unless instructed to.
When attaching a component having inertia to the motor, ensure any imbalance between the motor and component is minimized.
Be sure to attach a key to a motor with a keyed shaft.
Use the motor in appropriate environmental conditions. Do not store flammables in close proximity to the motor. When not in use,
store the motor in a dry location between 0° to 40° C.
Do not remove the nameplate from a motor.
For Circuit Boards
Minimize handling circuit boards as much as possible. If you must hold a circuit board, grab it by the edges as shown below in
figure 2. Avoid touching any of the circuits, components, or component leads. Improper handling lead to ESD (electrostatic
discharge) which can damage the PCB, and shorten the operational lifespan.
Keep the work are free from static generating materials such as Styrofoam, vinyl, plastic, and fabrics.
Page 4 of 86
Figure 1.
Improper PCB Handling
Figure 2.
Proper PCB Handling