CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 246

CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 41

Devices

Pyxis MedStation 4000 System Console User Guide

31

Entering station privileges for temporary users

This section describes how to complete the Station Privileges tab. Station
privileges are those associated with the temporary users that are added at the
station.

The following table provides examples of users and some of the privileges they
might need:

Each station privilege has unique properties. All are mutually exclusive, with the
exception of the Station Login/Witness Ability privilege. If you are given any
privilege other than this one, you automatically gets the Station Login/Witness
Ability privilege. Otherwise, assign each privilege individually.

Enable This Privilege

For

Station Login/Witness
Ability

Users who can act as witnesses to the following procedures,
but who do not have the authority to perform them:
•   Wasting a medication.
•   Returning an item.
•   Completing an inventory.
•   Documenting a discrepancy.
•   Recovering a drawer.
•   Emptying the Return Bin.
•   Print reports of their own transactions.

Activate/Create Temporary
User

Charge nurses or other users who can grant another user
temporary access to a station.

Admit/Edit/Discharge
Patients

Users who:
•   Reconcile patients at the station.
•   Update patient information.
•   Add patients to the census that are not usually entered

through the facility patient admitting system. (In most cases,
ADT information is managed through the hospital/Pyxis
MedStation system electronic interface between the
facility’s system and the Pyxis MedStation system.)

Station Administrator

Users who:
• Have completed the Pyxis MedStation system Manager

training.

• Are responsible for off-hours troubleshooting support of the

station, such as a third-shift pharmacist or nursing
supervisor.

«
...
39
40
41
42
43
...
»

Содержание Pyxis MedStation 4000























































































































































































































































Отзывы:

Нет отзывов