CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 143

Страница: 143 / 246

Communication status

Pyxis MedStation 4000 System Console User Guide

133

PriChan

—Primary channel for communication for this method, such

as a communications (COM) port or network adapter number.

SecChan

—Secondary channel for communication for this method

and is not currently supported.

MaxSess

—Maximum number of sessions allowed for this method.

CurSess

—Number of currently active sessions.

•

Sessions

—Displays the session status for all methods.

The fields are:

CommBox

—Specifies which communications PC this device is

configured to communicate with.

Session #

—Displays active sessions of communication between

devices.

Method

—Method type.

SessionStatus

—Current stage in the session for this device.

DeviceLinked

—Identifies a device. A device is any piece of

equipment which communicates directly with the console, such as a
station.

•

Protocol

—Displays the network communication. The Protocol tab

indicates the level of performance for each method. The information

Содержание Pyxis MedStation 4000























































































































































































































































Результаты поиска

Содержание Pyxis MedStation 4000

Отзывы:

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 143 / 246

Результаты поиска

Содержание Pyxis MedStation 4000

Отзывы: