manualshive.com logo in svg

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 111 / 246

Поделиться
Скачать
CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 111

Clinical data

Pyxis MedStation 4000 System Console User Guide

101

6. To allow you to enter the clinical data (for example, doctor name) once when 

removing, wasting, or returning multiple medications for the same patient, 
select 

Once

.

7. If the you enter the clinical data only when removing a medication via the 

override process or the patient’s profile, select 

Override only

.

8. To allow you to type in free-form text with a Single or Multi category type, 

select 

Type-in allowed

.

9. If only one response list available for this CDC, select 

One List

.

10. To define more than one list for this category, select 

Several

.

11. When you are finished, click 

OK

 to save your changes.

12. To return to the standby dialog box, click 

Close

.

NOTE

Clearing the Required check box allows the user to bypass entering clinical data.

NOTE

Clearing the Once check box requires the user to enter clinical data for each 
medication that is removed or returned. If you select 

Once

, you only enter CDC 

information once for several medications—if these medications have the same 
CDC turned on. The CDC information must be entered again when these 
medications are removed at the next dosing time.

NOTE

Clear the Override Only option to allow the user to enter clinical data for both 
profile and override transactions.

NOTE

This is helpful when the correct option does not exist in the response list. This 
option does not apply to the Type-in category type.

NOTE

If you select Several, you must define a name for each list and the responses for 
each list name.

Содержание Pyxis MedStation 4000























































































































































































































































Отзывы:

Нет отзывов