manualshive.com logo in svg

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 219 / 246

Поделиться
Скачать
CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 219

Clinical and operational alerts

Pyxis MedStation 4000 System Console User Guide

209

Clinical and operational alerts

The Pyxis MedStation system provides alert messages to Cerner when specific 
events occur. The alerts appear on the Cerner Alert Dashboard.

Alerts

•

Communications down—

when communications are interrupted or failed to 

initiate between the console and the station or the console and CareFusion 
Interface.

•

Critical override—

when a station is placed in “Critical Override” mode 

through the Temporary Non-Rx Mode, Manual Enable, Manual Enable on 
Downtime or Delay, or Use Schedule options available on the Rx tab in 
Device Settings.

•

Discrepancy recorded—

when a discrepancy has been recorded at a station.

•

Drawer unexpected open—

when a drawer is exposed without authorization.

•

Failed Drawer—

when a station drawer fails.

•

Order meds not loaded—

when an order is received for a medication that is 

not loaded in the station associated with the patient's nursing unit or visit unit.

•

Override performed—

when a medication is removed as an override.

•

RxCheck required—

when an RxCheck is required for a specific station, 

drawer, sub-drawer, and pocket.

•

Stock out—

when a medication becomes out of stock.

•

Stock critically low—

when stock is critically low based on a percentage of 

the pocket's “minimum stock” value.

•

Temp out of range—

when the temperature inside a refrigerator with Pyxis 

SMART Remote Manager becomes higher or lower than a specified range.

•

Unload standard stock—

when the last pocket of a indicated standard stock 

medication has been unloaded at a station.

•

Wrong dose removed:—

when the quantity of a medication removed is 

different than the ordered amount.

NOTE

For the 

Wrong dose removed

 alert, you must enable the Remove Warnings 

setting on the console for this alert.

Содержание Pyxis MedStation 4000























































































































































































































































Отзывы:

Нет отзывов